Hello,
We are implementing a new corporate wireless network with Cisco 5508 WLC 7.6 and 3700i LWAP. We are not running any RADIUS or EAP at the moment and are starting with WPA2 w/ AES with a pre-shared key to start
we configure profiling as following :
each device have an specific vlan on each floor and configure AP group to separate the AP
The issue we are having is iOS based devices (iPhone/iPad/android) doesn't take the correct vlan that assigned for each one of them ,instead
sometimes take an ip from the management vlan some time form the same vlan on other floor
Does anyone have any ideas or have run into this problem before?
Any help would greatly be appreciated.
Thanks!