PWRINJ4

[malsaadi2]

Hi everybody,

i have new access point 3702E with directional anntena, i think it needs power more than 15.4

the access switch 2960x 24 370W, that's mean each port 15.4.

my question is have i go with PWRINJR4 or  PWRINJR5 to increase the power.

[Scott Fella]

You need the PWRINJR-4. You can reference this day at sheet that mentions that specific model number:

http://www.cisco.com/c/en/us/td/docs/wireless/technology/apdeploy/8-0/Cisco_Aironet_3700AP.html

-Scott

*** Please rate helpful posts ***

[malsaadi2]

Hi scott Fella,

can i use access switch 2960x no poe with that pwrinjr4

because pwrinjr4 will provde 20w, l think no need to purchase switch POE while there is power injector 4 available

[malsaadi2]

what I mean is if there is switch 802.af plus pwrinjr5 how many W can we take

15.4+15.4= more than 20

is that correct?!

[Scott Fella]

You need to either have a 802.af or use a pwrinjr4.  There is no combination of power, bottom line, use one or the other.

-Scott

*** Please rate helpful posts ***

[malsaadi2]

Mr. Scott Fella,

i am confused, do mean i can go with switch no poe with power injector4

[Scott Fella]

You can use the switch as long as it supports the recommended power.

-Scott

*** Please rate helpful posts ***

[mohanak]

Refer the link : http://www.cisco.com/c/en/us/products/collateral/wireless/3700-series-access-point/data_sheet_c78-729421.html