03-31-2008 09:24 AM - edited 07-03-2021 03:37 PM
When adding a guest user with a lobbyadmin id, is it possible to assign that user a QoS role.
Solved! Go to Solution.
04-01-2008 08:35 AM
Hi,
This feature QOS roles for guest user using lobby admin was supported on wcs .yes,you are right,this qos role for guest user using lobby was not implemeted on controller side.
03-31-2008 10:43 AM
You only can assign an ssid tto a QoS level.
03-31-2008 10:55 AM
I have assigned the QoS policy to the SSID, however f I add a "guest account" with an admin account, it allows to to select "guest user role" and assign the QoS role that I have defined. When using the LobbyAdmin account this option is not there and the user is only limited to the QoS policy defined on the SSID. My thought was to create seperate roles and futher limit bandwidth depending on what the guest role was.
03-31-2008 11:01 AM
What code are you running?
03-31-2008 11:05 AM
4.2.61
03-31-2008 11:18 AM
Have you verified that it takes the QoS level you set when you are logged in as an administrator. I'm wondering if this overrides the SSID Qos level or not.
03-31-2008 11:20 AM
I have verified this, and yes it does override the SSID levels.
03-31-2008 11:28 AM
Nice to know.... Well since the Lobby Admin doesn't have this feature, you can always let your local wireless SE to put this as a future feature request.
04-01-2008 08:35 AM
Hi,
This feature QOS roles for guest user using lobby admin was supported on wcs .yes,you are right,this qos role for guest user using lobby was not implemeted on controller side.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide