07-24-2013 07:00 AM - edited 07-04-2021 12:30 AM
I need to update a 5508 WLC 7.2.103 to a version that supports the Access Point 2600 model, but the WLC administer it with a WCS version 7.0.230, which is the next version of software that supports the Access Point 2600 model and if that version is compatible with the WCS that I have?
07-24-2013 08:37 AM
Depending on what code version you require on the WLC, here is a matrix that will explain wht versions are compatible.
If you stay with v7.2.103.0, then you need NCS 1.1.0.58. Prime Infrastructure replaces both WCS and NCS so you might look at the upgrade from WCS to Prime Infrastructure.
Thanks,
Scott
Help out other by using the rating system and marking answered questions as "Answered"
07-24-2013 02:17 PM
Hello Juan,
Please refer to the link to upgrade WLC 5508 controller -
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a00805f381f.shtml
Hope this will help you.
07-24-2013 02:34 PM
My WCS is running 7.0.230.X but my WiSM2 are both running 7.4.100.X. No problem.
It'll work. Apparently, I was told that this is a "bug". But this is one bug I'm going to accept happily!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide