Radio interfaces of AP are down

[Noovi]

Hi Guys,

i am having one light weight Access Point of model 3802. It is associated to WLC but its radio intrfaces are down. Pleae refer attached snaps.

i tried to disable and enable radios from WLC end but still its operational status is shwoing down.

Any idea if it is hardware issue or any solution to make them up?

[Leo Laohoo]

What firmware is the controller on?

[Noovi]

8.3.143.0

[Leo Laohoo]

Is the AP status Disabled?

[Mark Elsen]

          - Reboot the AP , and just after startup logon to it and check the logs (show logging) , 

 M.

[Noovi]

Issue resolved by connectingPower injector to AP. It seems switch was not providing enough power to AP through PoE