radius auth interface for WLC

[Vinayaka Raman]

wlc mgmt interface,

wlc xyz interface---mapped to SSID which required radius auth...

which interface ip of WLC should be added as radius client on the radius server ?

[kcnajaf]

Hi Vinayaka,

You should add the managment interface of WLC to the ACS server as aaa client.

Hope that helps.

Regards

Najaf

Please rate when applicable or helpful !!!

[Scott Fella]

It depends now... In v7.4 it does have an entry for the WLAN also as a NAS Identifier. Also in v7.3 you can override the radius interface to use the dynamic interface for that WLAN.

By default you should use the management of the WLC. If on the WLAN SSID you check the Radius Server Overwrite Interface, it will use the interface applied to that WLAN.

Sent from Cisco Technical Support iPhone App