07-22-2013 01:33 AM - edited 07-04-2021 12:28 AM
Hello all,
Can anyone guide me how to rate/bandwidth limit for the Guest WLAN (towards internet) in Cisco 5508 (7.4.100.60) ..?
Any brief document available for this..?
Solved! Go to Solution.
07-22-2013 06:44 AM
Nope... It's a policy map that is used in the wired side.
Sent from Cisco Technical Support iPhone App
07-22-2013 01:39 AM
Hello,
Here is one cisco doc that might help you out with rate limiting with 5508:
http://www.cisco.com/en/US/products/ps10315/products_tech_note09186a0080bd3900.shtml
07-22-2013 01:57 AM
Thanks for sharing the link.
What will be the impact if we do it on the Guest wlan..?
Any best practice to be followed..?
07-22-2013 06:32 AM
Any one can suggest me here..?
07-22-2013 06:33 AM
Try this
http://www.cisco.com/en/US/products/ps10315/products_tech_note09186a0080baf502.shtml
Sent from Cisco Technical Support iPhone App
07-22-2013 06:39 AM
Thanks for your reply Scott..
This is per user based and that too we have to define policy on the switch side for UP/Down Stream traffic, is it..?
Is there any thing to do with WLC QOS part ...? I mean to say any config on WLC required to accomplish this..?
KVS
07-22-2013 06:44 AM
Nope... It's a policy map that is used in the wired side.
Sent from Cisco Technical Support iPhone App
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide