Realm stripping and proxy Radius directly from the AP/Controller

[ogvalverde]

Hello, I need to know if it is possible to perform proxy radius based on the realm, directly from the AP/Controller, as I have no Radius Server to perform this function. I know other vendors can, but I have searched into documentation, but i found nothing. Regards.

[Surendra BG]

Without radius server you can can go for a internal Radius server on the WLC..

Regards
Surendra

[ogvalverde]

Hello Susendra,

There are several RADIUS servers, but they are external, and I need to authenticate external users from those RADIUS, so I need to do Proxy Radius directly in the WLC. Is it possible?

I haven't found any doc about this.

Regards.

[Surendra BG]

Hi,

AFAIK proxy radius is done on the RADIUS and i dont think we have a option to do that on the WLC.. we can do the web redirect on the WLC though..

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008076f974.shtml#c5

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008067489f.shtml

lemme know if this answered your question..

Regards
Surendra
====
Please dont forget to rate the posts which answered your question and mark it as answered or was helpfull