Re: Reboot access points on 9800 WLC via CLI command - Cisco Community

26895

Views

9

Helpful

5

Replies

Can I reboot access points on 9800 WLC via CLI command?

5 Replies 5

AP name <name> reset

*****Help out other by using the rating system and marking answered questions as "Answered"*****
*** Please rate helpful posts ***

Hi Haydn,

9880-01#Testing-AP1-ATShepherdES reset
I have tried, and it is not working. What I am missing

cisco C9800-40-K9, Version 17.06.04

ABC_WLC01#ap name XYZ reset

"show ap uptime" can be usefull

Hi Haydn,

It's working, missing the (ap name). Can I reboot multiple APs from CLI?

Thanks

WLC#ap reset site-tag ?
WORD Enter site-tag name

So "ap reset site-tag <site-tag-name>".

You know you can use ? at the command prompt to see what the available options are right?

------------------------------
Please click Helpful if this post helped you and Accept as Solution (drop down menu at top right of this reply) if this answered your query.
------------------------------
TAC recommended codes for AireOS WLC's and TAC recommended codes for 9800 WLC's
Best Practices for AireOS WLC's, Best Practices for 9800 WLC's and Cisco Wireless compatibility matrix
Check your 9800 WLC config with Wireless Config Analyzer using "show tech wireless" output or "config paging disable" then "show run-config" output on AireOS and use Wireless Debug Analyzer to analyze your WLC client debugs
Field Notice: FN63942 APs and WLCs Fail to Create CAPWAP Connections Due to Certificate Expiration
Field Notice: FN72424 Later Versions of WiFi 6 APs Fail to Join WLC - Software Upgrade Required
Field Notice: FN72524 IOS APs stuck in downloading state after 4 Dec 2022 due to Certificate Expired
- Fixed in 8.10.196.0, latest 9800 releases, 8.5.182.12 (8.5.182.13 for 3504) and 8.5.182.109 (IRCM, 8.5.182.111 for 3504)
Field Notice: FN70479 AP Fails to Join or Joins with 1 Radio due to Country Mismatch, RMA needed
Field Notice: FN74383 APs Running 17.12.4/5/6/6a May Run Out of Flash Space Preventing Upgrades
How to avoid boot loop due to corrupted image on Wave 2 and Catalyst 11ax Access Points (CSCvx32806)
Field Notice: FN74035 - Wave2 APs DFS May Not Detect Radar After Channel Availability Check Time
Leo's list of bugs affecting 2800/3800/4800/1560 APs
Default AP console baud rate from 17.12.x is 115200 - introduced by CSCwe88390

Learn, share, save

Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.

New here? Get started with these tips. How to use Community New member guide

Log in to Community

Review Cisco Networking for a $25 gift card