recommended number of Users per AP (AIR-CAP2602I-E-K9)

[Rene S.]

Hi, is there a recommended maximum amount of users per AP? couldn't find such a parameter in the data sheet and noticed that load threshold on WLC is set to 12 clients

thanks,

KR rena

[nguyenducviet1983]

Hi Manish Mathur,

I have same issue, do you know how to co-channel interface in the network?

Environment: WLC2504 and AIR-CAP2602E-E-K9

Thank you.

[Manish Mathur]

Hi ,

You can download this tool (WLC config analyzer) from Cisco:

https://supportforums.cisco.com/document/7711/wlc-config-analyzer

Get the output of "show run-config" from the WLC in a text file. Load that file in the WLC config analyzer. It will show the co-channel interference if any.

Thanks

Manish

[nguyenducviet1983]

Hi, I have "paging disable" but still cannot get full output of "show run-config". It's very long.

Is there any other way?

Thank you.

[Manish Mathur]

If you have already run the command "config paging disable" , the output should be continuous. You may have to just press space once.

Regards,

Manish

[Scott Fella]

You can also download that from the GUI on the controller to a tftp or FTP.

-Scott 

*** Please rate helpful posts *** 

[nguyenducviet1983]

Hi Manish Mathur,

What should I do with this wlcca report?

I am not really understand about channel utilization.

Thank you.