Regarding problem with cisco ap

[diwakar410]

I have cisco 1700 AP. It was previously on Controller mode. Then, i changed it to standalone mode. Now, i am experiencing various problems.

1.I can't get the GUI access of AP though i can ping the ip of the AP.

2. AP doesn't broadcast the SSID.

what i noticed is the IP i set in the AP via console is shown this way:

[randyinfante21]

Hi Diwakar410

Maybe the BVI is in shutdown mode. Also in the switch configuration must same subnet of native vlan and the AP

[jkilleda]

Hello Diwakar,

Regarding problem with cisco ap

Add mbssid guest-mode command under the ssid configuration mode and then add mbssid command under the radio interface configuration mode.