Remove a wlan from a single AP of 10 - FlexConnect

[Ugoweb]

Hi, I have a vwlc with 300 AP and 120 WLAN with different AP Groups.

Now I have created a new AP Groups with 3 wlan and associated to 10 AP in flexconnect.

I need to remove 1st and 3rd wlan on a single AP (keep the 2nd).

How can I do ?

Thanks

[Scott Fella]

Create another ap group with the walls you want and add that one ap to that group.

[Ugoweb]

Thanks for the reply,
but I didn't want to create other AP Groups,

If possible I would like to inhibit the wlan that I don't want to show in broadcast.
Show image
Thanks

[patoberli]

That's what the AP Group is for. I think there is no other way. 

[Scott Fella]

You have to create another ap group. That is the function of an ap group to only allow certain wlans on specific access points.

[Ugoweb]

thanks for the replies,
I create a new ap group as done until now

[Scott Fella]

You don't want to mess with anything else, like the wlan to vlan as that still will broadcast the SSID.