replace webadmin certificate on HA WLC

[tgusset]

Hi

when you install a new certificate for webadmin (datatype = webadmincert) it will be only installed on the primary WLC.

Is there a way to install it also on the secondary unit?

Is it, for example, possible to force a switchover to the secondary unit, download the certificate and then reboot the system?

System is:

- 2 WiSM2 in a 65k VSS

- Version 7.3.112.0

Thanks in advance

Thomas

[Scott Fella]

Certificates have to be installed before the units are put into HA. This would be the same for WebAuth certificates too. I would be careful with HA as HA isn't stable at the moment no matter if you are on the latest v7.3 or v7.4.

Sent from Cisco Technical Support iPhone App