09-03-2013 09:55 AM - edited 07-04-2021 12:45 AM
Hello.
Can I use the same VLAN in multiples SSID?
Here is my config:
dot11 syslog
dot11 vlan-name Multi_TC_Legacy_1_VLAN_InsideFW vlan 400
dot11 vlan-name Multi_TC_RF_GMOL vlan 350
dot11 vlan-name Multi_TC_RF_VLAN_Management vlan 300
dot11 vlan-name Multi_TC_RF_VLAN_Radius vlan 301
!
dot11 ssid TOOLS
vlan 400
authentication open
authentication key-management wpa
wpa-psk ascii 7 107E080A1646405858
!
dot11 ssid sjcac-manuf-301
vlan 301
authentication open eap eap_methods
authentication network-eap eap_methods
authentication key-management wpa
!
dot11 ssid z06ctsv
vlan 350
authentication open eap eap_methods
authentication network-eap eap_methods
authentication key-management wpa
I would like to know if I can use VLAN 301 in SSID TOOLS and sjcac-manuf-301.
Thanks.
Fulvio Ferreira
09-03-2013 10:13 AM
The autonmous mapping is 1-to-1. So no, its not supported.
__________________________________________________________________________________________
"Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin
__________________________________________________________________________________________
"I'm in a serious relationship with my Wi-Fi. You could say we have a connection."
09-03-2013 10:13 AM
if you have a wlc, you can do that .
__________________________________________________________________________________________
"Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin
__________________________________________________________________________________________
"I'm in a serious relationship with my Wi-Fi. You could say we have a connection."
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide