Hello, we have a SDA network with DNA Center , ISE, C9300 switches, the WLC is AIR-CT5520 , and APs are AIR-AP2802 series.
This "AireOS" WLC is in fabric mode.
We need communication between IPADs device using WIFI, in order to print on a wired printer. The IPADs and wired printer are in the same VN.
I see in the Cisco documentation, some guides to configure mDNS, Airplay:
https://www.cisco.com/c/en/us/td/docs/cloud-systems-management/network-automation-and-management/dna-center/1-3-1-0/user_guide/cisco_dna_service_for_bonjour/b_cisco-dna-service-for-bonjour_user_guide_2-1-2/m_about_cisco_dna-center_bonjour.html
But I see examples in full SDA network, where there's compatibility with 9800 WLC but don't appears the 5520 model.
And other examples "Desploy Wide Area Bonjour on Traditional Networks", where it appears local mode, flexconnect mode, EWC mode .... but not fabric mode.
Then, the cuestion, it is possible to configure mDNS when we have a WLC-5520 in fabric mode?. The wireless clients are in the same vlan than the print server.
Has someone tested this scenario?
Thank you very much.