03-05-2014 06:54 AM - edited 07-05-2021 12:20 AM
I have several Cisco 1040 Series and 1260 Series wireless access points and the question I have is, is it possible to make a wireless conneciton to an AT&T or Verizon MiFi from my Cisco APs ? Would you somehow make a "bridge" connection or try use the WiFi's client capability somehow ? Thanks Guys.
03-05-2014 06:55 AM
Not really. There is a WGB mode, but I don't thing that will work for you.
Sent from Cisco Technical Support iPhone App
03-05-2014 06:56 AM
You could probably use the WGB mode of the aIOS AP to connect to your MiFi.
but, why are you looking to go that route?
HTH,
Steve
------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered
03-05-2014 06:58 AM
Your better off getting a Ethernet converter from a local electronics store and using that.
Sent from Cisco Technical Support iPhone App
03-05-2014 09:03 AM
Scott, thanks for the info. I'm not quite sure what you mean by getting an Ethernet Converter, is this something that would connect wirelessly to the MiFi and it has a LAN connection that I can then get into a Cisco Switch ?
03-05-2014 09:09 AM
Something like this
Thanks,
Scott
*****Help out other by using the rating system and marking answered questions as "Answered"*****
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide