Seeing SNMP traps logs in Catalyst 9800

[tom.barat@dimensiondata.com]

Hello,

In AirOS WLCs we can see SNMP traps logs in Management > SNMP > Trap logs.

Is there an equivalent to this page on Catalyst 9800 (v17.3.2a) ?

I found the following documentation that explains how to configure snmp traps on 9800 platforms but it is for version 17.4 and it looks like the chapter does not exist in the documentation for earlier releases. Also, this documentation only explains how to configure snmp traps, not how to actually see them in the GUI.

Thank you for your time,

Have a nice day.

[saravlak]

your observation is correct, Don't think there's an onboard trap receiver on WLC 9800 similar to WLC 3504. so it has to be an external trap receiver.

check this post for trap support.
https://community.cisco.com/t5/wireless/9800-vs-aireos-snmp-traps/td-p/4159627

[tom.barat@dimensiondata.com]

Hello,

Thank you for your answer.

I have seen the post you linked already. It will be helpful to avoid the related bug when configuring snmp traps but it does not really answer the main question about the GUI view.

[saravlak]

I checked all tabs and couldn't find in GUI.

you can check with Cisco to see, if they can add this feature in the future or its in their future feature roadmap.