03-16-2022 04:07 PM
Hi Experts,
We have configured two SSID using Flexconnect Local authentication on cisco 9800.
Both SSID ( SSID1 and SSID2) are broadcated on 3 diferente location using local radius.
Each location as 2 radius Servers.
All is working fine.
But now we have a requirement that is to use for exemple radius1 for SSID1 and Radius2 for SSID2 on each location.
Can you please advice if this can be done on 9800 WLC ?
Regard,
OZang
03-16-2022 06:00 PM
Sure you can.
You already have both radius added to the WLC. But, they are part of the same group. What you´ll need to do is to create two groups and insert one radius server in each. You can not use group as well but it is recommended because if tomorrow you add a new server to the network, you only need to add it to the group and done.
Once you create those groups with its server on it, you just need to point each SSID to its respective group.
03-16-2022 07:30 PM
Hi Flavio,
Thanks for your answer.
Can you please adavice where I can link that too the SSID please ?
1) I was thinking on adding on Security > AAA tab of the WLAN
The Problem here is that I also have the same WLAN Broadcasting the Same SSID on the Second location with diferent radius Server.
Each branch has 2 Radius in a local subnet. So i have 4 radius Servers ( Two per location)
2) I was not able to add it to the flex Profile because I have to select one radius group per Flex Profile.
Thanks For Your Help.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide