Setup URL redirection after connecting to WLAN

[huwyhuwy123]

hi there,

Sorry a different question to my last.

I have a wlc 5508 and I'd like to setup a network for visitors.

They will connect to the WLAN, enter a password and then automatically get redirected to an external website.

I understand the wlc 5508 supports this but I'm struggling to find out how to set this up - can anyone help? I assume this can be done without having to customise webauth bundles?

Cheers,

Al

[Scott Fella]

You can do this by using the default internal webauth templates in the wlc. Here is a link to a doc.

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008067489f.shtml

Sent from Cisco Technical Support iPad App

[Amjad Abdullah]

Hi,

You can do that from:

Security-> WebAuth -> Web login page.

then configure the "Redirect URL after login".

HTH

Amjad

[Jerome Tissieres]

Hi,

This is correct for a global policy. I mean for all the WLANs of the WLC.

But is it possible to specify a different redirect URL for each WLAN?

For example:

enterprise-WLAN -> redirect -> enterprise intranet

public-WLAN -> redirect -> enterprise public website (or google or whatever).

I tried with external auth, internal auth, web-bundle, I did not found how to make it.

Thank you

Jerome

[Amjad Abdullah]

You can do that from under WLAN cofnig -> Security -> Layer 3. for external servers only. not for the internal page..

[Ravi Singh]

As you already said that this is global policy. It is not possible to redirect on different URL for different WLAN.      

[Abhishek Abhishek]

Hello,

As per your query i can suggest you the following solution-

It can only be used for external servers but cannot be used for the internal server authentication.

Hope this will help you.

[Stephen Rodriguez]

The answer is yes, and no.

So you can do a per WLAN redirect, but you have to do custome pages for each WLAN.  You can specify the redirect URL in the HTML configuration

HTH,
Steve

------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered

[Jerome Tissieres]

Yes Stephen, you are right. Since my last post I find how to do the trick with the redirect URL into the HTML code of the landing page, and it works very well.

Cisco should add this option in a future WLC release. It's more comfortable to do it on the WLC GUI than changing HTML code in VI

Best Rgds,

Jerome

[jonatan.sitter]

Hi Stephen,
sorry for bringing this up again.
Could you maybe explain to me, how to create custome pages for each wlan?

Thank you in advance.