show net user summary output

[neil_cco_2094]

Hi All

I have a 5508 WLC running on 7.0.116, I need to be able to pull all configured users off the WLC and import into excel, I have 900 odd users configured. When I run a show net user summary it only displays a third of users.

I'm hitting space to tab through each page, then eventually I just get dumped back to the command prompt. Any ideas?

[Scott Fella]

Try to issue a config paging disable prior to running your command.

Sent from Cisco Technical Support iPhone App

[neil_cco_2094]

Hi Scott,

Thanks for the reply, I gave that a shot, it still is only outputting the names up to around 230 mark. Bug?

[Saravanan Lakshmanan]

Hi Neil

Sure you're hitting a bug there.

WLC>show run-config commands or pull the config from wlc and export the net users to excel.

Thanks

[Saravanan Lakshmanan]

you're hitting an internal bug that is getting fixed in future release, you need to open TAC case if you need more info about this bug.

[Saravanan Lakshmanan]

this bug is fixed on 7.2.103.0.