01-30-2014 09:50 PM - edited 07-05-2021 12:04 AM
Hi all ,
In our cisco 5508 WLC show sysinfo output , we are not able to see the current license level and license level on next reboot.
Any idea on why it is not showing?
Thanks,
Vijay
01-30-2014 11:17 PM
Hi Vijay,
Show sysinfo does not provide that information. Here is what show sysinfo provide. Probably you need to look at "show license summary" output
(WC01) >show sysinfo
Manufacturer's Name.............................. Cisco Systems Inc.
Product Name..................................... Cisco Controller
Product Version.................................. 7.4.111.5
Bootloader Version............................... 1.0.16
Field Recovery Image Version..................... 7.0.112.21
Firmware Version................................. FPGA 1.7, Env 1.8, USB console 2.2
Build Type....................................... DATA + WPS
System Name...................................... WC01
System Location.................................. ELT
System Contact................................... ICT
System ObjectID.................................. 1.3.6.1.4.1.9.1.1069
Redundancy Mode.................................. Disabled
IP Address....................................... 10.14.7.247
Last Reset....................................... Software reset
System Up Time................................... 2 days 5 hrs 11 mins 56 secs
System Timezone Location......................... (GMT+10:00) Sydney, Melbourne, Canberra
System Stats Realtime Interval................... 5
System Stats Normal Interval..................... 180
Configured Country............................... AU - Australia
Operating Environment............................ Commercial (0 to 40 C)
Internal Temp Alarm Limits....................... 0 to 65 C
Internal Temperature............................. +30 C
External Temperature............................. +18 C
Fan Status....................................... OK
State of 802.11b Network......................... Enabled
State of 802.11a Network......................... Enabled
Number of WLANs.................................. 3
Number of Active Clients......................... 116
Memory Current Usage............................. Unknown
Memory Average Usage............................. Unknown
CPU Current Usage................................ Unknown
CPU Average Usage................................ Unknown
Burned-in MAC Address............................ D0:D0:FD:1F:C2:00
Power Supply 1................................... Present, OK
Power Supply 2................................... Present, OK
Maximum number of APs supported.................. 350
(WC01) >show license summary
License Store: Primary License Storage
StoreIndex: 1 Feature: base-ap-count Version: 1.0
License Type: Permanent
License State: Inactive
License Count: 250 / 0 (Active/In-use)
License Priority: Medium
License Store: Primary License Storage
StoreIndex: 2 Feature: base-ap-count Version: 1.0
License Type: Permanent
License State: Active, In Use
License Count: 350 /350 (Active/In-use)
License Priority: Medium
HTH
Rasika
**** Pls rate all useful responses ****
01-30-2014 11:40 PM
Hi Rasika ,
But in the configuration guide of 7.2 release I am able to see that it displays the license info.
http://www.cisco.com/en/US/docs/wireless/controller/7.0/configuration/guide/c70ccfg.pdf
Bootloader Version............................... 5.2
Emergency Image Version.......................... N/A
Build Type....................................... DATA + WPS
System Name...................................... Cisco 69
System Location.................................. na
System Contact................................... abc@cisco.com
System ObjectID.................................. 1.3.6.1.4.1.14179.1.1.4.3
IP Address....................................... 10.10.10.10
System Up Time................................... 3 days 1 hrs 12 mins 42 secs
System Timezone Location.........................
CurrentBoot License Level..........................base
CurrentBoot License Type...........................Permanent
NextBoot License Level............................base
NextBoot License Type.............................Permanent
Operating Environment............................ Commercial (0 to 40 C)
Internal Temp Alarm Limits....................... 0 to 65 C
Internal Temperature............................. +40 C
State of 802.11b Network......................... Enabled
State of 802.11a Network......................... Enabled
Number of WLANs.................................. 4
Number of Active Clients......................... 0
Burned-in MAC Address............................ 00:1A:6D:DD:1E:40
Crypto Accelerator 1............................. Absent
Crypto Accelerator 2............................. Absent
Power Supply 1................................... Absent
Power Supply 2................................... Present, OK
Maximum number of APs supported.................. 12
01-31-2014 04:32 AM
It depends on what code you are on. With the later code versions of the WLC, you need to issues the show license summary like Rasika posted.
Sent from Cisco Technical Support iPhone App
01-31-2014 09:47 AM
Hi Scott,
We are running 7.2 version . But it is not displaying the license information as given in the config guide.
01-31-2014 10:03 AM
Maybe the guide is wrong:).
Show license summary is usually what used though.
Sent from Cisco Technical Support iPhone App
01-31-2014 10:14 AM
ok .. Thanks for the clarifiation Scott.
01-31-2014 01:45 AM
check the following link for command line guide
http://www.cisco.com/en/US/partner/docs/wireless/controller/7.0/command/reference/cli70over.html
http://www.cisco.com/en/US/docs/wireless/controller/7.0/configuration/guide/c70ovrv.html
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide