06-24-2021 12:53 AM - edited 07-02-2021 09:36 PM
06-29-2021 01:29 AM
- You may want to reboot the controller 'if times permit' , check if the problem remains afterwards.
M.
06-29-2021 12:19 PM
06-24-2021 04:50 AM
- Used for management by Prime, I think. Is the Prime server up and running ?
M.
06-29-2021 12:06 AM
Yes, prime is up and running, prime and wlc connection is active for all other wlc's except the one wlc.
tried to negate all those telemetry subscription, still status is disconnecting
06-29-2021 01:29 AM
- You may want to reboot the controller 'if times permit' , check if the problem remains afterwards.
M.
07-09-2021 09:08 AM
Finally fixed telemetry connection issues, here is the steps I performed
Delete all the telemetry subscription from the WLC configuration
WLC#term shell
WLC#function removeall() {
for id in `sh run | grep telemetry | cut -f4 -d' '`
do
conf t
no telemetry ietf subscription $id
exit
done
}
WLC#removeall
06-28-2021 11:36 PM
This can be Prime or DNAC or DNA Spaces connector, which one is yours from those?
06-29-2021 12:07 AM
Its prime, tried to negate all those telemetry subscription, still status is disconnecting, is there any way to fix it except reloading the wlc?
06-29-2021 12:19 PM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide