02-24-2015 07:42 PM - edited 07-05-2021 02:36 AM
Hello
It is possible to configure SNMP in an AP lightweight with WLC 5508 to get some information with snmpwalk as a AP Serial number?
Thanks for your help
Regards
02-24-2015 08:10 PM
It is possible to configure SNMP in an AP lightweight with WLC 5508 to get some information with snmpwalk as a AP Serial number?
Yes and no.
The details of the S/N are all found in the WLC. So if you need to do an SNMPwalk, do it on the WLC.
02-26-2015 01:14 PM
Leo
Thanks for your reply.
What if an AP is in flexconnect and I need to poling with an CiscoPrime.
It is possible to configure an AP with SNMP?
Thanks for your help
Regards.
02-26-2015 02:07 PM
Same thing. APs will "only talk to" the WLC. If you want to pull data, then the WLC is the only place to go. This is what we've done.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide