SSID/VLANs for Guest/Staff with 3600 and 2504 Controller

[John Gawf]

We are deploying 3600 AP's with a 2504 and would like to create multiple SSID's that are mapped to unique VLANs so we can control the traffic at the Firewall.  We have the 2504 up and running with AP's but there appears to be no where in the 2504 controller Web GUI to configure a VLAN mapping to an SSID.  Any pointers to documentation on how to configure?

[Stephen Rodriguez]

in the WLAN configuration, you select what interface you want it to be linked to.

In the Controller Tab, on the left, go to interfaces.  This is where you create teh interface name, set the VLAN,and the IP address.

Steve