cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1185
Views
0
Helpful
1
Replies

SSID witch MAC Filtering

nstr1
Level 4
Level 4

I am configuring an SSID with MAC Filtering, in the following way.

Configure an SSID with a PSK.

image.png

Configure Firewall rules & traffic shaping as follows.

image.png

Set up a Group policies and I am applying it to a MAC address that I registere.

image.png

All those devices whose MAC address is registered are connected, obtain an IP and have access to the Internet.

But I have a MAC address that is not registered, much less I am applying the group policy and this device manages to connect and obtain an IP, it does not have navigation, much less internet.

But I want to prevent it from not getting an IP and not connecting at all.

Is there any way to achieve this???

1 Reply 1

GreenMan
Cisco Employee
Cisco Employee

Is the device associating to SSID 'M-F' ? How is it getting the Pre Shared Key?

With the setup you have, if you want to prevent association, you need to keep the key private. Without the key, the client won't be able to access the SSID

Review Cisco Networking for a $25 gift card