cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
283
Views
0
Helpful
1
Replies

strange Radius issue on WC5508

rhienwei2010
Level 1
Level 1

This is strange.

My WLC 5508(runing on ver 6) works well with a WIN2003 Radius server for wireless users authentication.  Recently, our IT team built another Radius server on WIN2008. They replicated all Radius settings, passwords.  And the new WIN2008 Radius server works fine with my ASA Firewalls for VPN users authentication.  But, the WLC5508 just doesn't work with the WIN2008 Radius server, it always gave me 'Authentication failed' message when we tested it.  We tried many things, checked setting details many times to make sure they match, but jsut cannot make it working.

Can someone give me some advises, what I should do now?  why the new WIN2008 Radius server can work with my ASA, but just not my WC5508?

 

Thanks a lot.

1 Reply 1

Saurav Lodh
Level 7
Level 7

Use the below debugging

 

    debug aaa all enable—Configures the debug of all AAA messages.

    debug dot1x packet enable—Enables the debug of all dot1x packets.

 

    (Cisco Controller) >debug dot1x aaa enable

 

Review Cisco Networking for a $25 gift card