04-29-2014 07:58 AM - edited 07-05-2021 12:45 AM
Hello,
is there somewhere a documment that describes something like supposed distance which the wireless signal can reach when using for example AIR-ANT2566P4W-R? I need to know if I can use this antenna together with 2600 AP to create a point to point wireless link between two buildings when the distance between buildings is 200m...
Thank you.
Marek
Solved! Go to Solution.
04-30-2014 02:50 PM
I've not seen a document that shows the distance that you can cover with that antenna, it would vary depending on the power level you were using with it.
From what I've seen of that antenna though, I would think you would be able to use it to bridge 200m, if you had them on both sides and had them aligned properly. you will need to be careful of the backlobe of that antenna.
HTH,
Steve
04-30-2014 02:50 PM
I've not seen a document that shows the distance that you can cover with that antenna, it would vary depending on the power level you were using with it.
From what I've seen of that antenna though, I would think you would be able to use it to bridge 200m, if you had them on both sides and had them aligned properly. you will need to be careful of the backlobe of that antenna.
HTH,
Steve
04-30-2014 11:46 PM
Hello Steve,
thanks for sharing your experience. Nice blog - that is something for my RSS reader.
Thank you.
Marek
05-28-2014 03:47 PM
I have never been able to see the below scenario being implemented.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide