12-19-2011 01:26 AM - edited 07-03-2021 09:15 PM
Hi community,
to find the reason for my connection problems to our network over a AP541N
I have configured the AP541 to send its syslog messages to a syslog server.
Now I am looking for a document where I can find informations about the received
messages.
For example, what means
hostapd: wlan0: IEEE 802.11 STA 78:a3:e4:3e:f7:19 deauthed from BSSID 00:21:29:03:18:40 reason 3
or
hostapd: wlan0: IEEE 802.11 STA 58:1f:aa:2c:96:4b disassociated from BSSID 00:21:29:03:18:40 reason 8
Are there documents where the messages are explained ?
Regards
Joachim
Solved! Go to Solution.
12-21-2011 02:22 PM
Here is a document for cisco wireless access controller client reason codes:
http://www.cisco.com/en/US/docs/wireless/controller/3.2/configuration/guide/c32err.html
Client Reason Code…Description…Meaning
0…noReasonCode…Normal operation.
1…unspecifiedReason…Client associated but no longer authorized.
2…previousAuthNotValid…Client associated but not authorized.
3…deauthenticationLeaving…The access point went offline, deauthenticating the client.
4…disassociationDueToInactivity…Client session timeout exceeded.
5…disassociationAPBusy…The access point is busy, performing load balancing, for example.
6…class2FrameFromNonAuthStation…Client attempted to transfer data before it was authenticated.
7…class2FrameFromNonAssStation…Client attempted to transfer data before it was associated.
8…disassociationStaHasLeft…Operating System moved the client to another access point using non-aggressive load balancing.
9…staReqAssociationWithoutAuth…Client not authorized yet, still attempting to associate with an access point.
99…missingReasonCode…Client momentarily in an unknown state.
12-21-2011 02:22 PM
Here is a document for cisco wireless access controller client reason codes:
http://www.cisco.com/en/US/docs/wireless/controller/3.2/configuration/guide/c32err.html
Client Reason Code…Description…Meaning
0…noReasonCode…Normal operation.
1…unspecifiedReason…Client associated but no longer authorized.
2…previousAuthNotValid…Client associated but not authorized.
3…deauthenticationLeaving…The access point went offline, deauthenticating the client.
4…disassociationDueToInactivity…Client session timeout exceeded.
5…disassociationAPBusy…The access point is busy, performing load balancing, for example.
6…class2FrameFromNonAuthStation…Client attempted to transfer data before it was authenticated.
7…class2FrameFromNonAssStation…Client attempted to transfer data before it was associated.
8…disassociationStaHasLeft…Operating System moved the client to another access point using non-aggressive load balancing.
9…staReqAssociationWithoutAuth…Client not authorized yet, still attempting to associate with an access point.
99…missingReasonCode…Client momentarily in an unknown state.
12-21-2011 10:48 PM
Hi tmandule,
thanks, that helps me further.
Merry Christmas
Joachim
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide