Three AP with same ssid. create a ssid of Guest

[network-Raj]

We have three AP 1852i. configured in mobility express with same ssid. now we need one ssid  guest id.

one is working as primary and other two are working as secondary. But we have not configured as primary and secondary any ap. 

Please suggest how can we configured the new  ssid guest in one ap. 

regards

raj

[marce1000]

 - FYI : https://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/8-7/b_cisco_mobility_express_8_7/b_cisco_mobility_express_8_7_chapter_0110.html#task_D233A7F08DE340B3AA05C4CAA08FE49B

 M.

[Sandeep Choudhary]

Are these APs are working separately ? or one AP as main WLC and controlling the rest APs ?

Best would be to create a new SSID in AP which are working as WLC and assign this ssid in a different AP group.

Regards

Dont forget to rate helpful posts

If you are using as 

[balaji.bandi]

If your setup already running with other SSID you need to add only new SSID for Guest.

You need to make a different Group - since you looking to only broadcast only for AP ( so that will be based on the Group)

Then create a SSID as per below document

https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-6/b_cisco_mobility_express_8_6/b_cisco_mobility_express_8_6_chapter_0111.html

Once the new SSID created - add that to new Group (part of that AP you looking to broadcast) - i am sure you looking to have other SSID also to be served along with new Guest SSID. - so you need to add all SSID to that group, so Only that  desired AP will have new SSID and OLD SSID broadcast, another AP only current SSID will be there.,

AP Groups - above document covers how to make groups.