Total number of configured WLAN:s in WiSM, is it really 16???
I have a customer which network is based on 2 6500:s in the serverroom. The WAN is a L2-network with 802.1q-trunks and all Vlan:s are routed in the 6500:s.
Now we want to implement Wireless and 2 WiSM:s have been purshased. But now we find in the spec:s that the total number of Wlan:s are 16. And even as low as 8 depending of AP models.
Can this really be true?
What we want to do is to provide a department of wireless-access to the same vlan as their wired network. The network consists of a large number of vlan:s (as high as 4-500) and we want to provide wireless access on a lot of these places.
This means that on each physical location we do only want 1-2 Wlan/SSID:s. However, the total number of SSID:s/Wireless VLAN:s in the WiSM should be plenty much more than 16.
Depending on the AP, you can only have 8 or 16 SSID's. YOu shouldn't have the wireless users on the same subnet as your wired.... not best practice. What you should look at is AP-Groups... this allows you to have a single SSID mapped to various (wireless) subnets. This should help you:
We are excited to announce the Second refresh of 17.6.2 EFT/Beta Program for PRODUCTION deployments.
This release is the second qualified EFT/Beta Image and is BU supported.
After previous 17.6.1 CCO, this p...
Listen: https://smarturl.it/CCRS8E33 Follow us: https://twitter.com/ciscochampion The goal for stadium and large venue Wi-Fi is to deliver an exceptional, fast, and reliable wireless experiences to tens of thousands of fan...
We are pleased to announce the immediate availability of the IOS-XE release 17.6.1 for the Catalyst Wireless Controllers. The new code is now posted on the CCO and can be found at this link:
This version now introduces experimental new feature, "Upgrade Advisor, targeted to one of common case generators: what are the supported versions and how to upgrade my current controllers and APs
It supports both AireOS and IOS-XE, covering since ...
Thank you for the overwhelming response to the First and Second EFT refresh of 8.10MR6!
We are excited to announce the third refresh of 8.10 MR6 EFT Program for PRODUCTION deployments.
While the CCO release of 8.10MR6 is just a few we...