cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
814
Views
0
Helpful
2
Replies

Unable to reach vWLC from Switch

VamsiKrishna
Level 1
Level 1

Hello,

I have deployed a vWLC 8.2(192.168.50.100) with vlan id 0 in Vmware Workstation . After creating a virtual interface(192.168.51.10) in vWLC, I am unable to ping its gateway(192.168.51.1) in switch. I have given bridged connection in Host PC and trunk with native vlan 50 in switch side.

 

Unable to figure out what blocks the 192.168.51.0 network after creating interface ?

 

Thanks in Advance,

Vamsi Krishna

2 Replies 2

balaji.bandi
Hall of Fame
Hall of Fame

Do you have that VLAN associated that NIC in your VMWARE Switch config -

 

if that Local interface only your another VM Like windows provisioning in that VLAN able to communicate.

 

here is good steps :

 

http://netengu.blogspot.com/2012/12/use-cisco-vwlc-in-vmware-workstation.html

https://gradhelp96.blogspot.com/2019/06/how-to-setup-cisco-virtual-wireless-lan.html

BB

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help

Hi Balaji,

I haven't created any vlan in Host PC but i have allowed vlan 50(Mgmt network) & vlan51(Virtual interface network) in switch side.

Before creating the virtual interface in vWLC, I was able to ping other vlans in switch from vWLC.

I have already referred the links which you send.

 

 

Review Cisco Networking for a $25 gift card