11-15-2013 10:05 AM - edited 07-04-2021 01:16 AM
After updating a Controller IP I am not finding the option to update that information in Prime. It would appear I must remove the controller and add it again. Is this correct or am I missing an option?
Thank you
Solved! Go to Solution.
11-15-2013 02:13 PM
Yes, if you change the WLC IP, then you have to remove & re-add it to Prime.
Keep in mind when you adding a WLC to prime you use the WLC IP, so if you change WLC IP, prime assuming WLC is down, no way to determine what IP you have changed.
HTH
Rasika
**** Pls rate all useful responses ****
11-15-2013 02:13 PM
Yes, if you change the WLC IP, then you have to remove & re-add it to Prime.
Keep in mind when you adding a WLC to prime you use the WLC IP, so if you change WLC IP, prime assuming WLC is down, no way to determine what IP you have changed.
HTH
Rasika
**** Pls rate all useful responses ****
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide