04-27-2014 09:49 PM - edited 07-05-2021 12:44 AM
Hello,
We are running WLC 5508 with software version 7.1.91.0. We have recently run into bug CSCua29504 which prevents Windows 8 devices from joining the SSID which is configured with WPA/WPA2 with AES. Can someone suggest me a latest stable version to which i can upgrade our system.
Thanking you in advance.
Prince Mathew
Solved! Go to Solution.
06-02-2014 10:58 PM
Yes you can. Post the output to the command "sh sysinfo".
06-02-2014 11:13 PM
Here you go...
show sysinfo
Manufacturer's Name.............................. Cisco Systems Inc.
Product Name..................................... Cisco Controller
Product Version.................................. 7.1.91.0
Bootloader Version............................... 1.0.1
Field Recovery Image Version..................... 6.0.182.0
Firmware Version................................. FPGA 1.3, Env 1.6, USB console 1.27
Build Type....................................... DATA + WPS
System Name...................................... WLC1
System Location..................................
System Contact...................................
System ObjectID.................................. 1.3.6.1.4.1.9.1.1069
IP Address.......................................
Last Reset....................................... Power on reset
System Up Time................................... 41 days 18 hrs 55 mins 37 secs
System Timezone Location......................... (GMT +3:00) Baghdad
Current Boot License Level....................... base
Current Boot License Type........................ Permanent
Next Boot License Level.......................... base
Next Boot License Type........................... Permanent
Configured Country............................... KW - Kuwait
Operating Environment............................ Commercial (0 to 40 C)
Internal Temp Alarm Limits....................... 0 to 65 C
Internal Temperature............................. +44 C
External Temperature............................. +24 C
Fan Status....................................... OK
State of 802.11b Network......................... Enabled
State of 802.11a Network......................... Disabled
Number of WLANs.................................. 7
Number of Active Clients......................... 193
Burned-in MAC Address............................
Power Supply 1................................... Present, OK
Power Supply 2................................... Present, P
06-03-2014 01:05 AM
Bootloader Version............................... 1.0.1
This means the WLC has never had the FUS upgrade. Upgrade first to 1.7.0.0 using CLI (instructions already posted) and then reload the WLC. Only after the bootloader has been successfully upgraded to 1.7.0.0 can you upgrade to 1.9.0.0 and this time you can use the GUI.
06-03-2014 01:11 AM
What would be my current FUS version number? I just need this information so as to get the data from vendor.
06-03-2014 02:35 AM
The current version of your bootload is the (factory) default version.
06-03-2014 04:50 AM
Thank you. thanks for your time!!!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide