02-07-2011 05:59 AM - edited 07-03-2021 07:47 PM
hi ,
i have 1252 Autonomous ap .i need to convert it to LWAP .so what IOS is sutabble for the convertion.
what is the procedure ?
AP Model:AIR-AP1252AG-A-K9
please suggest the same .
thanks in advance.
02-07-2011 06:50 AM
Hi ,
If you have a few APs to migrate,You can use TFTP32 server and the command:
archive download-sw /overwrite /reload tftp://
You can obtain the c1250-rcvk9w8-tar.124-10b.JA3.tar or the latest c1250-rcvk9w8 image releases:
c1250-rcvk9w8-tar.124-10b.JDA.tar or c1250-rcvk9w8-tar.124-21a.JA2.tar
Download Software link on CCO>
Products>Wireless>Access point>Cisco Aironet 1250 Series>Autonomous to Lightweight Mode Upgrade image
Ensure that the access point has a route to the TFTP server. The access point and the TFTP server must be in the same subnetwork if you do not have a router to route traffic between subnets.
Check connectivity to the TFTP server by using the ping command.Ensure that the image to be downloaded is in the correct directory on the TFTP server.
If you have several APs to migrate, you can opt for the WCS and Migration template:
http://www.cisco.com/en/US/docs/wireless/wcs/6.0/configuration/guide/6_0apcfg.html#wp1054876
HTH,
Alex
02-09-2011 10:05 PM
hi Alex,
thanks for u r reply.i have converted to lwap and its working fine.
thanks & regards,
Venkat Mastan Babu N
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide