01-25-2017 05:05 PM - edited 07-05-2021 06:26 AM
I want to upgrade the device types for WLC version 8.0.140.0.
I read than I can upgrade the OUIs from IEEE page ( http://standards.ieee.org/develop/regauth/oui/oui.txt ), but, is it possible to add more devices types in the Device Profiling without cisco ISE? And, If I upgrade the OUIs, I'll lost the older or the news OUI's only are added.
Sorry for my English, this is not my native lenguaje.
Solved! Go to Solution.
01-25-2017 05:43 PM
Hi
This isn't an incremental update, it will replace all the database.
OUI and device profiling are 2 different databases.
I had some issues in the past. Sometimes the updates doesn't work and the database well be empty.
There only way to solve will be to re-apply the software code.
Thanks
PS: Please don't forget to rate and mark add correct answer if this answered your question
01-25-2017 05:34 PM
When you download the OUI list, you download the ENTIRE list (and not just the new ones).
Make sure you have authorized change control in place. I once crashed a pair of HA controllers when I upgraded the OUI.
01-25-2017 05:43 PM
Hi
This isn't an incremental update, it will replace all the database.
OUI and device profiling are 2 different databases.
I had some issues in the past. Sometimes the updates doesn't work and the database well be empty.
There only way to solve will be to re-apply the software code.
Thanks
PS: Please don't forget to rate and mark add correct answer if this answered your question
01-25-2017 06:55 PM
Thanks so much, the problem actually was than I made a policy to block cellphone devices, but some pc's are matching in the policy or some devices appear as unclassified, I assumed that upgrading the OUIs help to classified correct this devices, or upgrading the devices profiling, but I don't found the way to upgrade the device profiling without ISE.
If you have any suggestions on how to solve it, I would be grateful if you would share it with me.
01-25-2017 07:36 PM
Without ISE, there aren't multiple solutions.
You have to update OUI and device profiling on wlc.
Thanks
01-25-2017 08:24 PM
I searched but can't found the .xml file to upgrade the device profiling, is it available in the Cisco support page or how I can get it?
Thanks again.
01-25-2017 08:38 PM
Honestly I don't know if you can get it on Cisco web site.
You can export it from Cisco ISE.
If you have demo version then you are able to take it and upload in your wlc.
Maybe there is another way but I'm not aware of. I used to export it from ISE
01-25-2017 08:58 PM
Thank so much for your help, I will try that.
Regards.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide