04-17-2019 06:17 AM - edited 07-05-2021 10:16 AM
Hi All
We have some 2504 WLC running version 8.0.110.0.
We want to upgrade this to a more recent version, can anyone tell me what version we should go to and if there is a specific migration path we need to follow?
Many thanks
04-17-2019 06:29 AM
Have you looked at version 8.5.140
04-17-2019 08:47 AM
Can we go straight to this version ?
04-17-2019 07:47 AM
All you need to know can be found in the release-notes:
https://www.cisco.com/c/en/us/td/docs/wireless/controller/release/notes/crn85mr4.html
There you see that you should do an interims-upgrade before going to 8.5.
And it is very likely that you also have to upgrade the Field Upgrade Software to version 2.0.0.0:
https://www.cisco.com/c/en/us/td/docs/wireless/controller/release/notes/fus-rn-20.html
04-17-2019 07:39 PM
Hi Carl,
Yes I would go to 8.5.135.
However you would have to upgrade first to 8.2.16 or 8.3.x
When upgrading, you have to consider the following:
1. Check the compatibility matrix for your AP.
2. Check the Client Types and Supported version
3. Read this column as well on Release notes "Upgrading Cisco Wireless Release"
These are good references.
For Cisco 2504 WLC, Cisco 5508 WLC, and Cisco WiSM2, the Cisco WLC software image is split into two images, the Base Install image and the Supplementary AP Bundle image. Therefore, in order to upgrade, repeat Step 2 through Step 14 to complete the installation of both the Base Install image and the Supplementary AP Bundle image.
Download the Supplementary AP Bundle image only if you are using any of these APs: AP802, AP803, Cisco Aironet 1530 Series AP, Cisco Aironet 1550 Series AP (with 128-MB memory), Cisco Aironet 1570 Series APs, Cisco Aironet 1600 Series APs, or all of these APs.
Cheers,
Raffy
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide