11-10-2011 09:28 PM - edited 07-03-2021 09:03 PM
Hello,
Is it possible, through a QoS profile, to control how much bandwidth a user gets to use for upstream traffic? I can easily set limits for downstream traffic, via the per user bandwidth contracts, but it is not obvious to me on how to control upstream traffic.
Any and all info is appreciated!
Thanks
Solved! Go to Solution.
11-11-2011 04:41 AM
upstream traffic needs to be defined at L3, via your QoS settings. As you've said, the profile on the WLC is downstream only.
HTH,
Steve
Sent from Cisco Technical Support iPad App
11-11-2011 04:41 AM
upstream traffic needs to be defined at L3, via your QoS settings. As you've said, the profile on the WLC is downstream only.
HTH,
Steve
Sent from Cisco Technical Support iPad App
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide