01-29-2018 07:24 AM - edited 07-05-2021 08:10 AM
Is there a command that shows much time is remaining before a client will be removed due to the Contoller>User Idle Timeout (seconds) setting?
01-29-2018 07:57 AM
Hi
I dont know any command that show this information but in can see how long the client is connected using show client detail <mac address>,
show client detail 00:...
Connected For ................................... 6994 secs
-If I helped you somehow, please, rate it as useful.-
01-29-2018 09:56 PM
01-30-2018 11:13 AM - edited 01-30-2018 11:15 AM
Maybe our systems are different but with a similar command I got a nice output of the timeout, though it doesn't look great pasted in here so I bolded the fields. Thanks!
w01-a120#show controllers dot11Radio 1 client F0:76:6f:78:29:11
mac radio vap aid state encr Maxrate is_wgb_wired wgb_mac_addr
F0:76:6F:78:29:11 1 14 193 FWD OPEN MCS82SS false 00:00:00:00:00:00
Configured rates for client F0:76:6F:78:29:11
Legacy Rates(Mbps): 12 18 24 36 48 54
HT Rates(MCS):M0 M1 M2 M3 M4 M5 M6 M7 M8 M9 M10 M11 M12 M13 M14 M15
VHT Rates: 1SS:M0-8 2SS:M0-8
HT:yes VHT:yes 80MHz:yes 40MHz:yes AMSDU:yes AMSDU_long:no
11w:no MFP:no 11h:yes encrypt_polocy: 1
_wmm_enabled:yes qos_capable:yes WME(11e):no WMM_MIXED_MODE:no
short_preamble:no short_slot_time:no short_hdr:no SM_dyn:yes
short_GI_20M:yes short_GI_40M:yes short_GI_80M:yes LDPC:yes
is_wgb_wired:no is_wgb:no
Additional info for client F0:76:6F:78:29:11
RSSI: -47
PS : Legacy (Awake)
Tx Rate: 0 Kbps
Rx Rate: 0 Kbps
VHT_TXMAP: 0
CCX Ver: 0
Statistics for client F0:76:6F:78:29:11
mac intf TxData TxMgmt TxUC TxBytes TxFail TxDcrd RxData RxMgmt RxBytes RxErr TxRt RxRt idle_counter stats_ago expiration
F0:76:6F:78:29:11 apr1v14 9160349 1 9160349 2147483647 0 0 6063057 1 512621958 0 780000 866700 30 6.200000 8190
Per TID packet statistics for client F0:76:6F:78:29:11
Priority Rx Pkts Tx Pkts Rx(last 5 s) Tx (last 5 s) QID Tx Drops Tx Cur Qlimit
0 5756591 8870725 0 0 1384 49 7 4096
1 22217 10 0 0 1385 0 0 4096
2 0 11 0 0 1386 0 0 4096
3 38583 13042 0 0 1387 0 0 4096
4 0 0 0 0 1388 0 0 4096
5 0 0 0 0 1389 0 0 4096
6 0 0 0 0 1390 14 0 4096
7 0 0 0 0 1391 0 0 4096
01-30-2018 12:52 PM
01-31-2018 10:39 AM
Much nicer output from a 3802 versus the 3602.
Anyway, with a working client getting shut down, the idle-time decrements and the debug shows the disassociation of the client. The client is removed from botht he controller and the AP.
With a client that is exhibiting the issue, the client is not even listed int the AP but is listed in the WLC.
01-31-2018 11:31 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide