- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
01-25-2022 03:19 AM
Hi Guys,
We have a problem with our wireless. All user in some wlan get IP DHCP Server different from the IP DHCP has assigned to the interfaces wlan via GUI. Let say the IP DHCP Server we assiggned is 172.20.200.125 in wlan but in the user when they connect to the wireless we see IP DHCP Server 192.0.2.1 (virtual IP) but no issue with operational. Any idea about this issue? and how we can solve this?
Thanks for help
afre.J
Solved! Go to Solution.
- Labels:
-
Wireless LAN Controller
Accepted Solutions
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
01-26-2022 10:55 AM - edited 01-26-2022 10:56 AM
If you have enabled DHCP proxy mode in your WLC then the controller’s virtual IP address is normally used as the source IP address of all DHCP transactions to the client. So if that's the case this is expected. While the proxy mode is ideal only for selected networks, it widely accepted that dhcp bridge mode is better compatible with most of the clients are easy on the network as well.
TAC recommended codes for AireOS WLC's
Best Practices for AireOS WLC's
TAC recommended codes for 9800 WLC's
Best Practices for 9800 WLC's
Cisco Wireless compatibility matrix
___________________________________________
Arshad Safrulla
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
01-25-2022 04:22 AM
- Have a sanity check of the controller configuration with : https://cway.cisco.com/tools/WirelessAnalyzer/
M.
-- Each morning when I wake up and look into the mirror I always say ' Why am I so brilliant ? '
When the mirror will then always repond to me with ' The only thing that exceeds your brilliance is your beauty! '
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
01-26-2022 10:55 AM - edited 01-26-2022 10:56 AM
If you have enabled DHCP proxy mode in your WLC then the controller’s virtual IP address is normally used as the source IP address of all DHCP transactions to the client. So if that's the case this is expected. While the proxy mode is ideal only for selected networks, it widely accepted that dhcp bridge mode is better compatible with most of the clients are easy on the network as well.
TAC recommended codes for AireOS WLC's
Best Practices for AireOS WLC's
TAC recommended codes for 9800 WLC's
Best Practices for 9800 WLC's
Cisco Wireless compatibility matrix
___________________________________________
Arshad Safrulla
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
01-26-2022 02:46 PM
Hi Arshadsaf,
Yes you correct. I had search in cisco documentation and now DHCP Proxy is disable.
Thanks,
afre.j
