cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
427
Views
0
Helpful
2
Replies
abelliu86
Beginner

user to user per ssid

Hi,

I'm having some difficulties configuring my Cisco WLC (5508) - ver 7.0.230.0 .

I'm have multiple client device residing on same vlan associated to the WLC but unable to telnet over port 8090. However, when inter-vlan, client device able to telnet over port 8090.

So in brief :

Say Machine A as application hosted machine and Machine B as client machine;

Machine A

Machine B

Telnet over port 8090 from B to A

In Vlan 6

In vlan 6

Not ok

in Vlan 6

In vlan 4

OK

inVlan 4

In vlan 6

OK

Any advice where i should be looking on the WLC to allow telnet port 8090 over from Machine A to B within the vlan .

Thanks.

2 REPLIES 2
Scott Fella
Hall of Fame Guru

Make sure you don't have PTP blocking enabled on the WLAN SSID advanced tab.

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***

nope, the ptp blocking is disabled by default and were not configuration were made. so its disable. user is still not able to telnet from device from vlan 6 to vlan 6 via port 8090. No ACL were applied. anywhere else i should look at?

Create
Recognize Your Peers
Content for Community-Ad