cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
293
Views
4
Helpful
3
Replies
Highlighted
Beginner

user wlan on management interface

Hello,

I'm setting up a wlc, but i only have 2 vlans, one for data one for voice.

So i have configured the 'data' wlan on the management interface and it's working fine ...

Is there any reason why this shouldn't be done ?

Cheers,

Jan.

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted

Hi,

here is the LWAPP traffic study doc.. this will help u in getting the data on traffic passed between the WLC and the AP..

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_white_paper09186a0080901caa.shtml

Lemme know if this answered ur question!!!

Regards

Surendra

Regards
Surendra BG

View solution in original post

3 REPLIES 3
Highlighted
Cisco Employee

No problem in using , but the management interface as the name idicates.. this passes the management traffic as well!! ading the client traffic as well may over burden the interface right??

here is the link which tells us wat all the management int does..

http://www.cisco.com/en/US/docs/wireless/controller/7.0/configuration/guide/c70mint.html#wp1117168

this is the reason!!

lemme know if this naswered ur question and please dont forget to rate the usefull posts!!

Regards

Surendra

Regards
Surendra BG
Highlighted

Right, but apart from the traffic load (I don't have that many clients, especially on the data network).

Is there any indication how much traffic 6 AP's would generate for their connection to the WLC?

Highlighted

Hi,

here is the LWAPP traffic study doc.. this will help u in getting the data on traffic passed between the WLC and the AP..

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_white_paper09186a0080901caa.shtml

Lemme know if this answered ur question!!!

Regards

Surendra

Regards
Surendra BG

View solution in original post

Content for Community-Ad