05-14-2015 11:01 AM - edited 07-05-2021 03:14 AM
Hello,
In the operation of the WLC, I see that the response time is variable between 2-4ms and 800-1000 ms at the highest response time, falls to the ideal response time, again and again.
The WLC has the basic configuration five SSID and I am the only user on the WLC.
I Want to know any solution to this fail.
Thanks,
05-14-2015 04:16 PM
provide more info about your WLC. Pls provide output of "show sysinfo"
HTH
Rasika
05-15-2015 06:22 AM
Thanks, the sysinfo... (Cisco Controller) >show sysinfo Manufacturer's Name.............................. Cisco Systems Inc. Product Name..................................... Cisco Controller Product Version.................................. 8.0.115.0 Bootloader Version............................... 1.0.20 Field Recovery Image Version..................... 7.6.101.1 Firmware Version................................. PIC 20.0 Build Type....................................... DATA + WPS System Name...................................... WLC_01_ID205 System Location.................................. System Contact................................... System ObjectID.................................. 1.3.6.1.4.1.9.1.1279 IP Address....................................... 10.104.191.139 IPv6 Address..................................... :: Last Reset....................................... Power on reset System Up Time................................... 6 days 14 hrs 25 mins 24 secs System Timezone Location......................... System Stats Realtime Interval................... 5 System Stats Normal Interval..................... 180 Configured Country............................... CO - Colombia Operating Environment............................ Commercial (0 to 40 C) Internal Temp Alarm Limits....................... 0 to 65 C Internal Temperature............................. +32 C External Temperature............................. +37 C Fan Status....................................... 3800 rpm State of 802.11b Network......................... Enabled State of 802.11a Network......................... Enabled Number of WLANs.................................. 8 Number of Active Clients......................... 16 Burned-in MAC Address............................ 68:9C:E2:BF:24:40 Maximum number of APs supported.................. 75 System Nas-Id.................................... Cisco_bf:24:44 WLC MIC Certificate Types........................ SHA1/SHA2
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide