Verify the quantity of users in an AP

[Adrian Caba Gutierrez]

I have the WLC 4402 and my question is how I can verify the quantity of users in every AP.

Thanks.

[Scott Fella]

If you have WCS/NCS you ca look at the client count.  If not, then you can do a show run-config and run it through the WLC Config Analyzer.

https://supportforums.cisco.com/docs/DOC-1373

Thanks,

Scott

Help out other by using the rating system and marking answered questions as "Answered"

[Scott Fella · Accepted solution]

You can go under the GUI under:

Monitor > Clients > Change Filter

Then filter using AP name and it will list current clients for that AP.

Thanks,

Scott

Help out other by using the rating system and marking answered questions as "Answered"

[Adrian Caba Gutierrez]

Thanks a lot fot the help.

[Scott Fella]

No problem

Sent from Cisco Technical Support iPhone App