10-30-2016 08:39 PM - edited 07-05-2021 06:04 AM
Hello
I got virtual Wireless LAN Controller installed with version 8.1.102 on VMWare ESXi 5.1 running on IBM x3550M4 and the network card is E1000
Want to download via tftp the update to 8.3 but fails after 91%.
The following error comes. pls suggest.
Connection received from 172.22.8.250 on port 7700 [31/10 13:10:14.647]
Read request for file </AIR-CTVM-K9-8-3-102-0.aes>. Mode octet [31/10 13:10:14.648]
Using local port 64406 [31/10 13:10:14.657]
File <\AIR-CTVM-K9-8-3-102-0.aes> : error 10054 in system call recv An existing connection was forcibly closed by the remote host. [31/10 13:14:09.219]
I tried with FTP it doesn't work the network card seem's to crash for a little while because of the download failure.
Any clue?
10-30-2016 08:52 PM
Try to perform this from the wired network. Also if you still have issues, see if you can backup the config via TFTP or FTP. Make sure your FW on your machine is not blocking.
-Scott
*** Please rare helpful posts ***
10-30-2016 08:54 PM
Also make sure you check the MD5 hash on the image.
-Scott
*** Please rate helpful posts ***
10-30-2016 09:40 PM
I did and the check is successful
10-30-2016 09:48 PM
Upgrade to v8.2.130.0 then to v8.3 and see how that goes.
-Scott
*** Please rate helpful posts ***
10-30-2016 09:24 PM
hi Scott
I'm on the wired network on same subnet than the WLC and no FW between us.
10-30-2016 09:26 PM
Try to backup the config to tftp/ftp and verify that works first.
-Scott
*** Please rate helpful posts ***
06-04-2019 10:59 AM
Hi sir
can i make one question?
Did you resolve this problem?
could you say me how did you resolve it?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide