10-09-2015 08:00 AM - edited 07-05-2021 04:04 AM
I'm using my virtual WLC 8.0 with ISE 1.3 to make Central Web Auth (CWA). Since the WLC is virtual, the AP is in Flex mode and accordingly any ACL needed to be forced by ISE is Flex ACL.
The problem is that whenever i try to add the FlexACL to the AP or to the FlexGroup, the WLC gives an error (Request failed: Not a Webauth/WebPassthrough enabled Local Swicthed WLAN). While the WLAN to be configured for CWA needs to be (MAC Filtering enabled + No L3 Policy).
This scenario is explained in this URL for the Flex case but it shows that he can add the ACL to the AP normally. Anything am i missing or it is kind of limitation in virtual WLC?
Central Web Authentication with FlexConnect APs on a WLC with ISE Configuration Example - Cisco
10-31-2015 07:17 AM
Any help?
11-02-2015 04:52 PM
This may be a silly question but, have you enabled local-switching on the wlan? Just to make sure
11-03-2015 06:50 AM
Yes
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide