voice and minimum rssi
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
05-17-2016 09:18 PM - edited 07-05-2021 05:04 AM
Hi,
According to other vendors the minimum rssi required for voice is - 65 dBm and as per the cisco it is my -67 dBm
Any ideas ?
Thanks
- Labels:
-
Wireless LAN Controller
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
05-18-2016 03:08 AM
See this link:
Yes Cisco recommends -67 instead of -65 if you're using their equipment. If mixing or using other vendor equipment you should design for their recommendations.
Cheers,
Ric
Please rate helpful / correct posts

- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
05-18-2016 08:56 PM
Typically voice networks require a -65db or better signal level, while a data network needs -80db or better signal level.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
05-19-2016 03:54 PM
According to other vendors the minimum rssi required for voice is - 65 dBm and as per the cisco it is my -67 dBm
1. -65 dBm is a stronger signal to -67 dBm.
2. It is easier for some to memorize -65 dBm than -67 dBm.
