Wireless

Hi, If  I want to sniff multiple channel (for example roaming  )  using multiple ap's  , What is the best way to do this  Thanks

Hi, Is any way to authenticate Guests once they comes to our cooperate network.  IT Administrator need to get a message and he will authenticate them with out web auth Thanks,

Hi, what does the below traces indicate ? [06/12/16 12:11:26.890  911f9 244] ACCESS-CORE-SM-SYNC-NOTF: [55fd.529d.f399, Ca10] Delay add/update sync of addr for 55fd.529d.f399 / 0x58000308[06/12/16 12:11:26.890 911fa 244] ACCESS-CORE-SM-ERR: [55fd.529...

Hi I have installed a 5508 WLC running version 7.0.220.0 and set it up as a Guest Anchor.  The customer wants to install a SHA 2 SSL certificate.  Do I need to upgrade the code to do this and if so to what version? Thanks

Ok so I have a flat network at my home, and I recently got an ap1851.  Client can connect to it but they are not getting IP's address's.  I think that the vlan on the ssid is wrong/not setup.  How do you assign a vlan to the ssid? Thanks AJ

Hi, I would like to ask what are my options for implementing L2 over L3 tunneling to the Internet router only for guest wireless users, who will be gaining access via a captive portal? Based on the requirements from the customer, I believe the aim is...

I have a 3650 acting as a wireless lan controller, and 2702I access points. There is one particular access point, and one particular switch port that don't seem to like each other. When I plug the access point into any other port, it is successful. W...

Hello All, Thanks to anyone who can respond.   I just set installed 2 autonomous 1572E APs as backhaul bridges only.  They are about 600 ft apart.  I'm using the AIR-ANT5114P2M-N= antenna on both sides.  These APs are installed on the roof of 2 build...

Hello,  I did a "show ap summary" on one of the WLCs we have and 9 LAPs were listed displaying the LAP's name, MAC, IP address, model, and number of clients associated with each LAP. A client's laptop is showing that it associated with a LAP and disp...

In order for Prime to alert when there is a Rogue AP on the wired network do Cisco switches have to be managed by Prime?

I just got one of these Access Points and I need to set it up. No guide online helped me so far, except one that says I need a controller of some sort on the same network. Is there a way to set up the Access Point easily without any additional hardwa...