vWLC Stucked in stage2 "Press any key to use this terminal as the...."

[rashid_av]

Hello All,

I was deploying vWLC airos in Vmware workstation,

i`m getting stucked in the screen

stage2 "Press any key to use this terminal as the default terminal"

any help?

[rashid_av]

[marce1000]

 - FYI : https://www.cisco.com/c/en/us/products/collateral/wireless/virtual-wireless-controller/data_sheet_c78-714543.html

  Check Table 2 :

 >...Virtual Machine Specifications

 Cisco Virtual Wireless Controller can run on any x86 server that supports HyperV, VMware ESXi 4.x, 5.x, and 6.x and KVM Linux based systems. The resource requirements from the virtualized server hardware:

  It does not run on Vmware workstation , let alone your problem vmware workstation does not offer the v-switches configuration settings and or availability that the vwlc  needs.

 M.

[rashid_av]

Hello marce 

Thank you for the reply.

Now I have installed the wlc and able to ping and access bit through the cli.

I tried to connec an WAP to switch and its getting DHCP ip as well and trying to associate with WLC.

Now the problem is I'm unable to access the GUI of the WLC.