02-16-2016 06:55 AM - edited 07-05-2021 04:37 AM
We just installed a WAP551 and every morning I have to reboot the device so any device will connect to it. After reboot all seams to be working until the next day. I am able to login to the WAP551 via web browser and I see no problems. The SSID stops broadcasting, I cannot see the access point on any device until a reboot it. Any help would be appreciated.
10-26-2016 08:14 AM
Had to work on this for about two weeks and finally figured out. Check this out, I wrote a knowledge base article on it
https://www.bostonit.com/knowledge-base/cisco-wap-551-561-ssid-disappearing-stop-broadcastiing/
04-05-2018 10:06 AM
I have tried the solution to this and still have problems. I have updated firmware and have tried disabling the MFP. Everyday the AP stops broadcasting the SSID only after a restart will devices connect. We have 9 AP in a cluster and this happens randomly on others and more on one.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide