Hi,
I've got 9 2802i access points setup using mobility express that works quite well for the most part - on average we have 170 devices connected and working properly. We are using ME ver. 8.8.120
However, we are regularly having trouble with devices associating to the AP, but not getting an IP address. If I remote into the AP and show the log, I see many warnings about running out of memory. If I reboot the AP, devices can join the AP properly again. I've seen this issue on about 4 of our APs, so I don't think hardware is the issue.
May 14 07:11:58 apsw_watchdog: WARNING: System memory is running low (free memory: 88 MB)!!
May 14 07:11:58 kernel: [*05/13/2019 21:41:58.8066]
May 14 07:11:58 kernel: [*05/13/2019 21:41:58.8066] !!!!! {watchdogd} WARNING: System memory is running low (free memory: 88 MB)!!
May 14 07:11:58 kernel: [*05/13/2019 21:41:58.8066]
May 14 07:22:49 apsw_watchdog: WARNING: System memory is running low (free memory: 88 MB)!!
May 14 07:22:49 kernel: [*05/13/2019 21:52:49.0347]
May 14 07:22:49 kernel: [*05/13/2019 21:52:49.0347] !!!!! {watchdogd} WARNING: System memory is running low (free memory: 88 MB)!!
May 14 07:22:49 kernel: [*05/13/2019 21:52:49.0347]
May 14 07:33:39 apsw_watchdog: WARNING: System memory is running low (free memory: 88 MB)!!
May 14 07:33:39 kernel: [*05/13/2019 22:03:39.2628]
May 14 07:33:39 kernel: [*05/13/2019 22:03:39.2628] !!!!! {watchdogd} WARNING: System memory is running low (free memory: 88 MB)!!
May 14 07:33:39 kernel: [*05/13/2019 22:03:39.2628]
May 14 07:44:29 apsw_watchdog: WARNING: System memory is running low (free memory: 89 MB)!!
May 14 07:44:29 kernel: [*05/13/2019 22:14:29.4878]
May 14 07:44:29 kernel: [*05/13/2019 22:14:29.4878] !!!!! {watchdogd} WARNING: System memory is running low (free memory: 89 MB)!!
May 14 07:44:29 kernel: [*05/13/2019 22:14:29.4879]
Any thoughts on how to workaround this possible memory leak?
Travis
